|
Written by David Clark Headset
|
|
Sunday, 02 May 2010 01:16 |
David Clark H10-13.4 Headset
David Clark H10-13.4 Review:
- Super Soft, Double Foam Head Pad
- New Comfort gel, undercut ear seals on the David Clark H10-13.4 Headset
- Certified Noise Reduction Rating - 23 dB
- David Clark H10-13.4 Headsets feature a reduced headband force
- Universal Flex Boom for perfect microphone placement
- Exclusive M-7A, the most advanced noise-cancelling microphone available
- Low-profile volume control knob with detent settings for the David Clark H10-13.4 Headset
- Molded cord assembly made to exceptional pull and flex standards
- 5-year Guarantee on all David Clark H10-13.4 Headsets
- FAA TSO Approved C57 Cat. B and C58a
- Exceeds RTCA/DO-214 Standards
- Weight (without cord assembly): 16.5 oz. on David Clark H10-13.4 Headsets
David Clark H10-13.4 Features
To learn more about the David Clark H10-13.4 headset features and read reviews about the H10 line of ANR headsets please visit David Clark H10-13.4
|
| Earphone Type: |
Dynamic |
Noise-Cancel Mic: |
M-7A Amplified Electret |
| Earphone Impedance: |
150 ohms(300 each; wired in parallel) |
Mic Impedance: |
50 ohms +/- 20% |
| Earphone Sensitivity: |
90 dB SPL on flat plate coupler, re 1mW input @ 1KHz |
Mic Sensitivity: |
400mV RMS ±6dB into 150 ohm load @ 1kHz for 114dB SPL input |
| Earphone Frequency Response: |
200-5,500 Hz |
Mic Freq Response: |
300Hz--3.5KHz per RTCA DO 214 |
| Earphone Plug: |
PJ-055 (.25" phone plug) |
Mic Plug: |
PJ-068 (.206" phone plug) |
| Boom Type: |
Universal Flex |
Cord: |
5 ft.Straight |
| Headpad/Hardware: |
Super-Soft, Double-Foam Headpad,Lightweight Hardware for the David Clark H10-13.4 Headset |
Weight/Headset Only: |
16.5 oz. |
|
|
Last Updated on Monday, 16 August 2010 00:19 |
